Defining Issues & Priorities


Ensure that the key issues facing business have been realistically defined in light of the current and rapidly changing business environment. There is nothing new about this requirement, but the fact is that very few management teams actually take the time and apply the discipline necessary to objectively define and prioritize the key issues that can make or break their business. The issues of inferior quality, higher cost products, lower productivity, and nonresponsive service plague manufacturers for the better part of the recent past. Many companies in industries such as steel, automotive, machine tool, textile, farm and construction equipment suffer badly as a result. Only few companies address these issues in effective ways. Most are unable to clearly identify the key issues, set priorities, and develop the necessary business plans to overcome the underlying problems.

While the specific issues vary for different companies and industries, the management mindset should not vary. To deal effectively with an increasingly turbulent environment, priorities must be set so the business can survive unexpected blows, adapt to sudden dropping changes, and then capitalize on smaller windows of opportunity that develop and close much more quickly than they have in the past.

Many progressive managers kick off their planning process with a session aimed specifically at getting agreement on key issues and priorities. Accepting these priorities require a shift in the way most managers think and act, such as:

  • Liquidity becomes a more important objective, often more important than reported earnings. It provides the flexibility to deal more effectively with unexpected events than is possible when everything is tied up in fixed and slow moving assets.
  • Productivity gains per dollar of capital and per employee must be achieved annually. These reductions must exceed inflation and achieve demonstrably lower costs.
  • Innovation must never stop. Demonstrable product and process improvements must be achieved year after year.
  • All cycle and response times must be continuously reduced.
  • A “frightened” sense of urgency must be the way of life in all parts of the business.

My Consultancy–Asif J. Mir - Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Marketing Plan


A marketing plan embodies the strategic marketing management process. It is a formal written document that describes the context and scope of an organization’s marketing effort to achieve defined goals or objectives within a specific future time period. A formal written marketing plan represents a distillation of and the attention and interrelated analytical processes. It is the tangible result of an intellectual effort.

My Consultancy–Asif J. Mir - Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Be Inquisitive in Customer Service


Desire quality, efficiency, and precision

  • Focus on the customer’s need for accuracy and efficiency by methodically outlining steps, processes, or details related to a product or service.
  • Communication should be tied into facts, not feelings.
  • Have details and information prepared in advance and be thoroughly familiar with them
  • Approach encounters in a direct, businesslike, low-key manner.
  • Avoid small talk and speaking about yourself.
  • Ask specific open-ended questions about customers’ background or experiences related o the product or service.
  • Present solutions in a sequential fashion stressing advantages, value, quality, reliability and price. Also, be prepared to point out and discuss disadvantages.
  • Have documentation available to substantiate your claims.
  • Don’t pressure customer decisions and follow through on promises.

My Consultancy–Asif J. Mir - Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures

360-degree Feedback


The 360-degree Feedback Process is being increasingly used in organizations for development, appraisal and compensation purposes. It involves a collection of perceptions about an individual’s behavior and its impact on bosses, colleagues, subordinates as well as internal and external customers. Competency models help to ensure that such feedback relates specifically to the competencies crucial to individual or organizational success.

My Consultancy–Asif J. Mir - Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Market Sales Potential


Market sales potential is a quantitative approximation of effective demand. Specifically, market sales potential is the maximum level of sales that might be available to all organizations serving a defined market in a specific time period given 1) the marketing mix activities and effort of all organizations, and 2) a set of environmental conditions. As this definition indicates, market sales potential is not a fixed amount. Rather, it is a function of a number of factors, some of which are controllable and others not controllable by organizations. For example, controllable marketing-mix activities and marketing related expenditures of organizations can influence market sales potential. On the other hand, consumer disposable income, government regulations, and other social, economic, and political conditions are not controllable by organizations, but do affect market sales potential. These uncontrollable factors are particularly relevant in estimating market sales potential in developing countries.

My Consultancy–Asif J. Mir - Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Tariff Barriers


Different nations handle tariff barriers differently. A country may have a single tariff system for all goods from all sources. This is called a uni-linear or single-column tariff. Another type of tariff is the general-conventional tariff. This tariff applies to all nations except those that have tariff treaties (or a convention to that effect) with a particular country. A tariff may be worked out on the basis of a tax permit, called specific duty, or as percentage of the value of the item, which is referred to as ad velorem duty. Sometimes both specific and ad valorem duty may be levied may be levied on the same item as a combined duty.

My Consultancy–Asif J. Mir - Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Definition of the Problem


We must first define a problem exactly before we can describe, analyze, and explain it. We define it with the deviation statement, or name of the problem. It is important to state this name precisely because all the work to follow—all the description, analysis, and explanation we will undertake—will be directed at correcting the problem as it has been named.

However simple or complex a problem may seem at the outset, it is always worth a minute or two to ask, “Can the effect of this problem in the deviation statement be explained now?” If it can, we must back up to the point at which we can no longer explain the deviation statement. Vague or generalized deviation statements must be reworded into specific deviation statements that name one object or kind of object, and, and one malfunction or kind of malfunction for which I wish to discover and explain cause.

It is tempting to combine two or more deviations, in a single problem-solving effort or to try bunch a bevy of seemingly related problems into one overall problem. Nearly, everyone has attended meetings during which two or more distinct problems were tied ankle to ankle in a kind of problem-solving sack race. This procedure is almost always inefficient and unproductive.

My Consultancy–Asif J. Mir - Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Project Implementation


Clarify implementation goals and standards—what is the intended result of the project? How will we know when we have achieved it? To provide direction to the project the goal should be expressed in terms of performance or output. The goal should be specific, realistic, attainable, challenging, consistent with the available resources and the organization’s policies and procedures, measurable and should have a deadline. The implementation standards should address quality, quantity and timing. This should include a set of standards to identify what actions must be taken meet them.

My Consultancy–Asif J. Mir - Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Factors of Production


Each business has its own mix of the four factors of production, vis-à-vis, natural resources, labor, capital, and entrepreneurship.

Natural resources refers to everything useful in its natural state as a productive input including agricultural land, building sites, forests, mineral deposits, and so on. Natural resources are basic resources required in any economic system.

Labor is critically important. It refers to everyone who works for a business, from the company president to the production manager, the sales representative, and the assembly line worker.

Capital is defined as the funds necessary to finance the operation of a business. These funds can be provided in the form of investments, profits, or loans. They are used to build factories, buy raw materials, hire workers, and so on.

Entrepreneurship is the taking of risks to set up and run a business. The entrepreneur is the risk taker in private enterprise system. In some situations the entrepreneur actively manages the business; in others this duty is handed over to a salaried manager.

All four factors of production must receive a financial return if they are to be used in a private enterprise system. These payments are in the form of rent, wages, interest, and profit. The specific factor payment received varies among industries, but all factors of production are required in some degree for all businesses.

My Consultancy–Asif J. Mir - Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Previous Older Entries

Follow

Get every new post delivered to your Inbox.

Join 46 other followers