Defining Issues & Priorities


Ensure that the key issues facing business have been realistically defined in light of the current and rapidly changing business environment. There is nothing new about this requirement, but the fact is that very few management teams actually take the time and apply the discipline necessary to objectively define and prioritize the key issues that can make or break their business. The issues of inferior quality, higher cost products, lower productivity, and nonresponsive service plague manufacturers for the better part of the recent past. Many companies in industries such as steel, automotive, machine tool, textile, farm and construction equipment suffer badly as a result. Only few companies address these issues in effective ways. Most are unable to clearly identify the key issues, set priorities, and develop the necessary business plans to overcome the underlying problems.

While the specific issues vary for different companies and industries, the management mindset should not vary. To deal effectively with an increasingly turbulent environment, priorities must be set so the business can survive unexpected blows, adapt to sudden dropping changes, and then capitalize on smaller windows of opportunity that develop and close much more quickly than they have in the past.

Many progressive managers kick off their planning process with a session aimed specifically at getting agreement on key issues and priorities. Accepting these priorities require a shift in the way most managers think and act, such as:

  • Liquidity becomes a more important objective, often more important than reported earnings. It provides the flexibility to deal more effectively with unexpected events than is possible when everything is tied up in fixed and slow moving assets.
  • Productivity gains per dollar of capital and per employee must be achieved annually. These reductions must exceed inflation and achieve demonstrably lower costs.
  • Innovation must never stop. Demonstrable product and process improvements must be achieved year after year.
  • All cycle and response times must be continuously reduced.
  • A “frightened” sense of urgency must be the way of life in all parts of the business.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Appointing a Dealer


  1. The Branch Manager perceives a need for an additional dealer in an area. Need occurs if any existing dealer leaves or is removed. It could also happen when the company expands into new territory.
  2. The Branch Manager has to convince the general manager of the division about the need for anew dealer.
  3. The selection process for the dealer begins with placing advertisements in newspapers and trade magazines inviting applications. Applications for dealership are directed to the concerned branch manager.
  4. The branch manager then reviews the application forms and prepares a shortlist if necessary. The company has not laid down any concrete guidelines for shortlisting at this stage. The branch manager is allowed to exercise his discretion.
  5. The shortlisted applicants are interviewed by the branch manager along with the regional sales manager of the division. Whatever additional information is required is obtained from the applicants during the interview. The dealers are evaluated on:
    1. Prior business record
    2. The capability of maintaining and running his own showroom
    3. Financial strength
    4. Inventory: The dealer must have enough working capital for maintaining specified level of inventory. This condition is however is applied only in the case of dealers whose territories are located considerably away from a branch office. This is because there is a company owned warehouse along with every branch office and for dealers located in the same cities there is no necessity to maintain separate inventory
    5. Contacts with customers
    6. Availability of salesforce to service customer effectively. In addition, technicians also need to be present to meet the after-sales service requirements of the products
  6. The final selection decision is made after talking with the bankers of the applicant. This is done to check the veracity of information regarding financial strength and prior business experience. It is only after the company is satisfied regarding all aspects of he information, that it sends the dealer an appointment letter
  7. The appointment letter lays down several terms of the contract that have to be fulfilled by the dealer. The company expects the dealers not to sell any competitors’ products. The dealer is also expected to conduct his business only within the clearly demarcated sales territory allocated to him by the company.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Focusing Organization


This focus begins when someone at top identifies a set of concerns that require correction. These concerns are of significant importance to the organization, rather than passing operational concerns. They are persistent, undesirable situations that have grown over time and have never been adequately addressed. It is clear that a major effort is required to solve them and that new skill and approaches have to be developed if the effort is to be successful.

 The entire project is planned as a taskforce attack on identified situations; objectives—analysis and correction of the target situations, objectives are defined. This planning cannot be delegated. It is done by top management, since responsibility for the project must reside with those who initiate it. By actively directing the project, top management makes its support of the ideas evident to everyone. By participating in the project throughout its life, top management returns control and ensures success.

 The management works out a comprehensive plan and schedule. The population of individuals who can contribute in solving the target situations is identified by name and position. Workshops are scheduled. It is in the workshops that the participants learn. They apply their skills to analysis of their assigned concerns.

 My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Selection of Dealers


  • The company does not advertise for new dealers. Whenever the need to appoint a new dealer for an area is felt the word is spread around. This is being used as the type of dealer who sell pumps and motors are mostly concentrated in a locality in every town or city
  • The interested dealers are asked to present before the branch manager and the group marketing manager as to how they would be able to serve the company
  • The selection is then done on the basis of following criteria:
  1. Financial Strength: The capability of the dealer to be able to hold sufficient stock as per the potential of the area, both in the present and in the future, and whether he will be able to pay the companies dues in time.
  2. Manpower: the strength of the workforce for handling sales, delivery, store handling, after sales service etc. the quality of the workforce in terms of educational qualifications, technical competency, and experience is also seen.
  3. Contacts: As the business for these types of products is done on  the basis of contacts that form a major basis for selection and include the present customers of the dealers, experience in dealing with such customers, and overall contacts in the society
  4. Floor space: Depending on the quantity of products to be stocked for the targeted sales, the floor space of the godown should be sufficient and located close to the market
  5. Location: Location and ambiance of the outlet are not important.
  • Feedback from the market is obtained through the market network and the present dealer network. The feedback is sought for things like authenticity of the claims and the reputation of the person to be appointed.
  • Appointment is given to the elected dealers after they give a security deposit. Every dealer is required to make a deposit with the company, which works out to roughly around three months of expected sales.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Develop Retail Profiles


This will require an understanding of:

  • Types of outlets that sell the product
  • The type of consumers they cater to and the expectations of the consumer. This includes customer needs that the retail outlet is fulfilling, the factors influencing the consumers to choose a particular outlet, and the extent to which they patronize the outlets.
  • The behavior of the retailer with respect to displays, inventory, etc.

These profiles will help the marketer identify the type of outlets that would be catering to the target segment identified in the marketing strategy or the outlets that would suit their positioning strategy.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Change and Gain


The best schedule for your business is likely to be very different from your current schedule. Innovative schedules that require major changes are the most likely to give the biggest benefits. On the other hand, the closer the new schedule is to the current schedule, the easier it is for workers to accept. Implementing a current modified schedule is easier but has a limited impact. In some companies even a relatively simple change—new shift start times, changing the direction of rotation, or a new vacation selection method—can create considerable controversy while not solving fundamental scheduling problems. Changing schedules is an emotional event for your employees, so you might as well tackle all of your scheduling problems at the same time.

Ask whether you want to make a small change or a big change. As a rule of thumb, aim for the greatest change possible, because you are not going to get all the way there anyway. Most organizations have a built-in inertia that limits change. On a scale from 0 to 10, with 0 being the current schedule and 100 being the perfect schedule, aim for 100, with the hope that your business will fall within the 80 to 90 range.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Previous Older Entries