Defining Issues & Priorities


Ensure that the key issues facing business have been realistically defined in light of the current and rapidly changing business environment. There is nothing new about this requirement, but the fact is that very few management teams actually take the time and apply the discipline necessary to objectively define and prioritize the key issues that can make or break their business. The issues of inferior quality, higher cost products, lower productivity, and nonresponsive service plague manufacturers for the better part of the recent past. Many companies in industries such as steel, automotive, machine tool, textile, farm and construction equipment suffer badly as a result. Only few companies address these issues in effective ways. Most are unable to clearly identify the key issues, set priorities, and develop the necessary business plans to overcome the underlying problems.

While the specific issues vary for different companies and industries, the management mindset should not vary. To deal effectively with an increasingly turbulent environment, priorities must be set so the business can survive unexpected blows, adapt to sudden dropping changes, and then capitalize on smaller windows of opportunity that develop and close much more quickly than they have in the past.

Many progressive managers kick off their planning process with a session aimed specifically at getting agreement on key issues and priorities. Accepting these priorities require a shift in the way most managers think and act, such as:

  • Liquidity becomes a more important objective, often more important than reported earnings. It provides the flexibility to deal more effectively with unexpected events than is possible when everything is tied up in fixed and slow moving assets.
  • Productivity gains per dollar of capital and per employee must be achieved annually. These reductions must exceed inflation and achieve demonstrably lower costs.
  • Innovation must never stop. Demonstrable product and process improvements must be achieved year after year.
  • All cycle and response times must be continuously reduced.
  • A “frightened” sense of urgency must be the way of life in all parts of the business.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Appointing a Dealer


  1. The Branch Manager perceives a need for an additional dealer in an area. Need occurs if any existing dealer leaves or is removed. It could also happen when the company expands into new territory.
  2. The Branch Manager has to convince the general manager of the division about the need for anew dealer.
  3. The selection process for the dealer begins with placing advertisements in newspapers and trade magazines inviting applications. Applications for dealership are directed to the concerned branch manager.
  4. The branch manager then reviews the application forms and prepares a shortlist if necessary. The company has not laid down any concrete guidelines for shortlisting at this stage. The branch manager is allowed to exercise his discretion.
  5. The shortlisted applicants are interviewed by the branch manager along with the regional sales manager of the division. Whatever additional information is required is obtained from the applicants during the interview. The dealers are evaluated on:
    1. Prior business record
    2. The capability of maintaining and running his own showroom
    3. Financial strength
    4. Inventory: The dealer must have enough working capital for maintaining specified level of inventory. This condition is however is applied only in the case of dealers whose territories are located considerably away from a branch office. This is because there is a company owned warehouse along with every branch office and for dealers located in the same cities there is no necessity to maintain separate inventory
    5. Contacts with customers
    6. Availability of salesforce to service customer effectively. In addition, technicians also need to be present to meet the after-sales service requirements of the products
  6. The final selection decision is made after talking with the bankers of the applicant. This is done to check the veracity of information regarding financial strength and prior business experience. It is only after the company is satisfied regarding all aspects of he information, that it sends the dealer an appointment letter
  7. The appointment letter lays down several terms of the contract that have to be fulfilled by the dealer. The company expects the dealers not to sell any competitors’ products. The dealer is also expected to conduct his business only within the clearly demarcated sales territory allocated to him by the company.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Buying Behavior


The effectiveness of the different options would depend on the buying behavior. Telemarketing is an example that highlights the importance of understanding the buying behavior before allotting the functions. Several telemarketing agencies promote their products through television. However, the sales of those brands are not picking up as this method is unable to allow the consumers to feel the  product or have a demonstration. Noticing this deficiency the telemarketing agencies open franchise outlets in major towns to satisfy this consumer requirements.

 My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Global Marketing Place


Several factors have forced countries to extend their economic views to events outside their own national borders. First, international agreements are being negotiated in attempt to increase trade among nations. Second, the growth of electronic commerce and related computer technologies brings previously isolated countries into their marketplace for buyers and sellers around the globe. Third, the interdependence of the world’s economies is a reality since no nation produces all of the raw material and finished goods purchased by its citizens or consumers of all its output without some exporting to other countries. Evidence of this interdependence is illustrated by the introduction of the Euro as a common currency to facilitate trade among the nations of the European Union and the creation of trade alliances.

Service firms also play a major role in today’s global marketplace. In many cases, global marketing strategies are almost identical to those used in domestic markets. Rather than creating a different promotional campaign for each country, marketers use the same ad with spectacular results.

Domestic marketing strategies may need significant changes to adapt to unique tastes or different cultural and legal requirements abroad. It is often difficult to standardize a brand name on a global basis.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Market-Development Strategy


A market-development strategy dictates that an organization introduces its existing offerings to markets other than those it is currently serving. Examples include introducing existing products to different geographical areas or different buying publics.

The mix of marketing activities used must often be varied to reach different markets with differing buying patterns and requirements. Reaching new markets often requires modification of the basic offering, different distribution outlets, or a change in sales effort and advertising.

Market development involves a careful consideration of competitor strengths and weaknesses and competitor retaliation potential. Moreover, because the firm seeks new buyers, it must understand their number, motivation, and buying patterns in order to develop marketing activities successfully. The firm however must consider the strengths, in terms of adaptability to new markets, in order to evaluate the potential success of the venture.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Effective Segmentation


Segmentation does not promote marketing success in all cases. Effectiveness depends on the following basic requirements:

  • The market segment must present measurable purchasing power and size.
  • Marketers must find a way to effectively promote to and serve the market segment.
  • Marketers must identify segments that are sufficiently large enough to give them good profit potential.
  • The firm must target segments that match its marketing capabilities. Targeting a large number of niche markets can produce an expensive, complex and inefficient strategy.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Quality or Excellence?


The question is what is the organization trying to accomplish? Is it striving for quality, or excellence or both? Quality and excellence are two different terms. Quality is an absolute state—in the control of total quality management, quality is conformance to requirements, doing things according to standards. Excellence is a relative term, to put it simply, it is being better than others. It requires comparison. So it can be said that quality is built in, while excellence is designed. If the goal is quality, it means individuals will be assessed on whether they meet the established standards. It is assumed that they possess the minimum competencies. If the goal is to achieve excellence, individuals will be assessed on their competence levels based on a continuous evaluation scale. Hence when evaluating for excellence, it would be necessary to compare the relative competence between two employees in addition to measuring their competence against the standards scale.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Employee Demand


Demand for workers is linked to the economic cycle increasing in boom times and decreasing in recession. Other factors include the adoption of new technology, productivity, improvements and changing skill requirements. Superficially, calculating employment supply and demand seems easy. In practice, the combination of variable consumer demand, development of new products and technology, and economic turbulence make it extremely problematic.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Incremental Change Analysis


Most business focuses on the current situation, with changes defined on an iterative, cumulative basis. In this context, issues represent problems or opportunities for change from the current situation. The gaps represent ways that a company may achieve or enhance a competitive edge.

The most common way to define issues is to assess the changes that are expected t occur. These are derived from either internal or external changes, intended by management or occurring as a result of uncontrolled forces (as in workforce changes). Issues are identified in the way that people normally think—incrementally from the present toward future.

In this process, managers identify and evaluate human resource issues by sorting through available strategic planning, competitive, and environmental information for evidence of changes having human resource implications and then define human resource issues that may be addressed. Such analysis may examine employee productivity issues, service quality, staffing surpluses or shortfalls, succession needs, skill requirements, utilization, costs, turnover/retention patterns, or employee attitudes.

Managers also obtain and consider perspectives of relevant constituents, such as other managers and employees, vendors, suppliers, and customers. Companies solicit inputs from managers at various levels through their participation in the planning process or through interviews, focus groups, or surveys with key managers. Many companies survey employees, either specifically for planning inputs or more broadly as an assessment of organizational climate and human resource practices. Companies may involve employees through interviews or focus groups to help define issues and alternative strategies. Some also interview or survey customers, contractors, and other business partners regarding human resource issues to be addressed.

Environmental scanning is used to identify prospective human resource issues deriving from changing external conditions. Scanning the many changes occurring in social, political, legislative, demographic, economic, technological and other areas yields a wide array of issues that may be considered.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Futures Analysis


Futures analysis allows companies to project future conditions and set future objectives to be achieved. It represents a leap to the future rather than step-by-step progression from  today’s situation forward to the future. It allows managers to assess the future relevance of issues that appear important today and thereby identify important human resource issues.

Futures analysis is an inherent requirements for strategic thinking. It requires defining the forces shaping the future, evaluating alternative future states, setting objectives, and selecting courses of action that will yield needed changes in direction for the enterprise. While incremental change analysis looks at continuities, futures analysis looks at discontinuities.

Futures analysis provides at least a conceptual vision of the future that can help identify and define organizational or competitive requirements. In its simplest forms, futures analysis involves open thinking about future issues and options. Companies use brainstorming, visioning, or modified Delphi analysis (iterative survey of experts) to help define the future human resource issues that need to be addressed. It is an exercise that may involve many participants within the company as well as outside consultants or others.

Futurists, functioning on company planning staffs and as independent consultants, have helped assess the prospective futures in which companies would operate. Their value added appears to lie in their work on demographic technological and environmental futures. In other areas, such as, socio-political changes worldwide, energy availability, economic conditions, or legislation.

My Consultancy–Asif J. Mir – Management Consultant–transforms organizations where people have the freedom to be creative, a place that brings out the best in everybody–an open, fair place where people have a sense that what they do matters. For details please visit www.asifjmir.com, and my Lectures.

Previous Older Entries